1. <em id="ueq4d"><tr id="ueq4d"><u id="ueq4d"></u></tr></em>
    2. <tbody id="ueq4d"></tbody>
      1. <dd id="ueq4d"><noscript id="ueq4d"></noscript></dd>
        <button id="ueq4d"><object id="ueq4d"></object></button>
        <tbody id="ueq4d"></tbody>
      2. New Products

        Bante900P pH/Conductivity/DO Meter

        Multiparameter water quality meter, containing 8 measurement modes, stores up to 500 data.

        pH Mode:
        ? Multiparameter water quality meter is equipped with a backlit LCD display.
        ? 1 to 5 points calibration with automatic recognition for USA, NIST and DIN buffers.
        ? Automatic electrode diagnosis shows the pH slope and offset.

        ORP Mode:
        ? 1 point offset calibration allows adjusting the displayed value to a known standard.
        ? Relative and absolute millivolt modes ensure the reliable ORP measurements.

        pH Conductivity Dissolved Oxygen Meter

        Ion Concentration Mode:
        ? 2 to 5 points calibration, including the 8 concentration points can be selected.
        ? Direct ion concentration readout simplifies the measurement process.
        ? Automatic electrode diagnosis shows the calibration points and slopes.
        ? Selectable concentration units (ppm, mg/L, mol/L, mmol/L) and ionic valency.

        Conductivity/TDS/Salinity/Resistivity Modes:
        ? 1 to 5 points calibration with automatic recognition for conductivity standards.
        ? Selectable cell constant (K=0.1/1/10), reference temperature (20/25°C), TDS factor, linear
          and pure water compensations, seawater and practical salinity measurement modes.

        Dissolved Oxygen Mode:
        ? 1 or 2 points calibration using the air-saturated water or zero oxygen solution.
        ? Salinity and barometric pressure compensations eliminate the measurement error.

        pH Conductivity Dissolved Oxygen Meter

        Other Features:
        ? Automatic temperature compensation ensures accurate readings over the entire range.
        ? Auto-Read function senses and locks the measurement endpoint.
        ? Calibration due alarm prompts user to calibrate the meter regularly.
        ? Auto-Power Off effectively conserves battery life.
        ? Setup menu allows setting the number of calibration points, stability criteria, temperature
          unit, date and time, etc.
        ? Reset function automatically resumes all settings back to the factory defaults.
        ? Expanded memory stores or recalls up to 500 data sets.
        ? USB communication interface is easy to transfer data to PC.
        ? Multi-mode power scheme (batteries, power adapter and USB port) ensures that using the
          meter smoothly.

           Model


        Bante900P

           pH



           Range


        -2.000 to 20.000pH

           Resolution


        0.001, 0.01, 0.1pH, selectable

           Accuracy


        ±0.002pH

           Calibration Points


        1 to 5 points

           pH Buffer Options


        USA, NIST, DIN, 2 custom buffers

           ORP



           Range


        ±1999.9mV

           Resolution


        0.1, 1mV, selectable

           Accuracy


        ±0.2mV

           Calibration Points


        1 point

           Measurement Modes


        Relative or absolute mV

           Ion Concentration



           Range


        0.001 to 19999 (deponding on the range of ISE)

           Resolution


        0.001, 0.01, 0.1, 1

           Accuracy


        ±0.5% F.S. (monovalent), ±1% F.S. (divalent)

           Calibration Points


        2 to 5 points

           Calibration Solutions

        0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000

           Measurement Units


        ppm, mg/L, mol/L, mmol/L

           Conductivity



           Range


        0.01 to 20.00, 200.0, 2000μS/cm, 20.00, 200.0mS/cm

           Resolution


        0.001, 0.01, 0.1, 1

           Accuracy


        ±0.5% F.S.

           Calibration Points


        1 to 5 points

           Calibration Solutions


        10μS, 84μS, 1413μS, 12.88mS, 111.8mS

           Temperature Coefficient


        Linear (0.0 to 10.0%/°C), pure water

           Reference Temperature


        20/25°C

           Cell Constant  


        K=0.1, 1, 10 or custom

           TDS



           Range


        0.00 to 10.00, 100.0, 1000ppm, 10.00, 200.0ppt

           Resolution


        0.01, 0.1, 1

           Accuracy

        ±1% F.S.

           TDS Factor

        0.1 to 1.0 (default 0.5)

           Salinity



           Range


        0.00 to 80.00ppt, 0.00 to 42.00psu

           Resolution


        0.01

           Accuracy

        ±1% F.S.

           Resistivity



           Range


        0.00 to 20.00MΩ

           Resolution


        0.01

           Accuracy


        ±1% F.S.

           Dissolved Oxygen



           DO Range


        0.00 to 20.00mg/L

           Resolution


        0.01, 0.1mg/L, selectable

           Accuracy


        ±0.2mg/L

           % Saturation of Oxygen


        0.0 to 200.0%

           Resolution


        0.1, 1%, selectable

           Accuracy


        ±2.0%

           Calibration Points


        1 or 2 points

           Pressure Correction


        60.0 to 112.5kPa/450 to 850mmHg, manual

           Salinity Correction


        0.0 to 50.0g/L, manual

           Temperature



           Range


        0 to 105°C/32 to 221°F

           Resolution


        0.1°C/0.1°F

           Accuracy


        ±0.5°C/±0.9°F

           Offset Calibration


        1 point

           Calibration Range


        Reading ±10°C

           General Specifications



           Temperature Compensation


        0 to 100°C/32 to 212°F, manual or automatic

           Stability Criteria

        Low or high

           Calibration Due Alarm


        1 to 31 days or off

           Auto-Power Off

        10, 20 or 30 minutes after last key pressed

           Memory

        Stores up to 500 data sets

           Output

        USB communication interface

           Connector

        BNC, 6-pin nimi-DIN, 3.5mm jack socket

           Display

        Custom LCD (80×60mm)

           Power

        3×1.5V AA batteries or DC5V power adapter

           Battery Life

        Approximately 150 hours (turn off the backlight)

           Dimensions


        170(L)×85(W)×30(H)mm

           Weight


        300g

           Order Code

        Accessories

           Bante900P-CN

        E201-BNC pH electrode

        CON-1 conductivity electrode

        DO100 dissolved oxygen electrode

        TP-10K temperature probe

        pH4.01/7.00/10.01 buffer sachets

        Conductivity standards 84μS/cm, 1413μS/cm, 12.88mS/cm

        DO electrolyte solution

        DO membrane cap

        Carrying case

           Bante900P-UK

           

        P11 glass pH electrode

        K10 conductivity electrode

        DO100 dissolved oxygen probe

        TP-10K temperature probe

        pH4.01/7.00/10.01 buffer sachets

        Conductivity standards 84μS/cm, 1413μS/cm, 12.88mS/cm

        DO electrolyte solution

        DO membrane cap

        Carrying case

        Items Description
        P11 pH Electrode For the general applications
        P11-LiCl pH Electrode For the non-aqueous samples
        P11-HA pH Electrode For the high alkalines samples
        P11-NA pH Electrode For the biofuels
        P12 pH Electrode For the sample in the test tube
        P13 pH Electrode For the micro-volume samples
        P15 pH Electrode For the low conductivity samples
        P16 pH Electrode For the Tris buffers
        P18 pH Electrode For the slurries and soils
        P19 pH Electrode For the semisolids
        P21 pH Electrode For the colloids
        P22 pH Electrode For the high temperature samples
        501 ORP Electrode For the sample with strong redox potential
        502 ORP Electrode For the sample with weak redox potential
        Na-US Sodium Electrode Range: 0.1 to 23000ppm
        CL-US Chloride Electrode Range: 1.8 to 35500ppm
        F-US Fluoride Electrode Range: 0.02ppm to saturation
        Ca-US Calcium Electrode Range: 0.02 to 4000ppm
        NO3-US Nitrate Electrode Range: 0.4 to 62000ppm
        Br-US Bromide Electrode Range: 0.4 to 79900ppm
        NH4-US Ammonium Electrode Range: 0.1 to 18000ppm
        Cn-US Cyanide Electrode Range: 0.2 to 260ppm
        Cd-US Cadmium Electrode Range: 0.01 to 11200ppm
        Cu-US Copper Electrode Range: 0.006 to 6400ppm
        I-US Iodide Electrode Range: 0.06 to 127000ppm
        Pb-US Lead Electrode Range: 0.2 to 20700ppm
        Ag-US Silver Electrode Range: 0.01 to 107900ppm
        K-US Potassium Electrode Range: 0.04 to 39000ppm
        S-US Sulphide Electrode Range: 0.003 to 32100ppm
        NH3-US Ammonia Electrode Range: 0.02 to 17000ppm
        CON-0.1 Conductivity Electrode For the pure water
        CON-1 Conductivity Electrode For the general water
        CON-10 Conductivity Electrode For the high conductivity water
        DO100 Dissolved Oxygen Electrode For the DO and % saturation measurements
        DO Membrane Cap For the dissolved oxygen electrode
        DO Electrolyte Solution For the dissolved oxygen electrode
        TP-10K Temperature Probe For the temperature measurement
        pH Buffer Solutions 480ml/bottle
        Conductivity Standard Solutions 480ml/bottle
        Ion Standard Solutions 480ml/bottle
        Ionic Strength Adjuster 480ml/bottle

           Order Code

        Carton Dimensions (L×W×H)

        Weight    

           Bante900P-CN

        430×310×100mm

        2kg    

           Bante900P-UK

        430×310×100mm

        2kg